Electric tabletop steam sterilizer, 40L Manufacturer,Supplier and Exporter in India
Product Code : EL-SS-11861
Science Lab Export is a leading Electric tabletop steam sterilizer, 40L Manufacturer,and suppliers in India, Electric tabletop steam sterilizer, 40L Uruguay (Montevideo), Electric tabletop steam sterilizer, 40L Uzbekistan (Tashkent), Electric tabletop steam sterilizer, 40L Venezuela (Caracas), Electric tabletop steam sterilizer, 40L Vietnam (Hanoi), Electric tabletop steam sterilizer, 40L Yemen (Sana'a), Electric tabletop steam sterilizer, 40L Zambia (Lusaka), Zimbabwe (Harare), Eswatini (Mbabane) (Lobamba), Ethiopia (Addis Ababa), Fiji (Suva), Gabon (Libreville), Gambia (Banjul), Georgia (Tbilisi), Ghana (Accra), India (Delhi, Mumbai, Kolkatta, Chennai), Indonesia (Jakarta), Iraq (Baghdad), Ivory Coast (Yamoussoukro), Jamaica (Kingston), Jordan (Amman), Kazakhstan (Astana), Kenya (Nairobi), Kiribati (Tarawa), Kosovo (Pristina), Kuwait (Kuwait City), Kyrgyzstan (Bishkek), Laos (Vientiane), Latvia (Riga), Lebanon (Beirut), Lesotho (Maseru), Liberia (Monrovia), Libya (Tripoli), Lithuania (Vilnuis), Luxembourg (Luxembourg), Malawi (Lilongwe), Malaysia (Federal Territory of Kuala Lumpur), Maldives (Malle), Mali (Federal Territory of Kuala Lumpur), Malta (Male), Mauritania (Nouakchott), Mauritius (Port Louis), Mexico (Mexico City), Mongolia (Ulaanbaatar), Bulgaria (Sofia), Burkina Faso (Ouagadougou), Burundi (Gitega), Cambodia (Phnom Penh), Cameroon (Yaoundé), Cape Verde (Praia), Central African Republic (Bangui), Chad (N'Djamena), Chile (Santiago), Colombia (Bogota), Comoros (Moroni), Congo (Kinshasa), Costa Rica (San José), Croatia (Zagreb), Cuba (Havana), Cyprus (Nicosia), Czech Republic (Prague), Denmark (Copenhagen) ,Djibouti (Djibouti City), Dominican Republic (Santo Domingo), DR Congo (Kinshasa), Ecuador (Quito), Egypt (Cairo), El Salvador (San Salvador), Equatorial Guinea (Malabo), Eritrea (Asmara), Estonia (Tallinn)
Tabletop electric sterilizer (autoclave) with a capacity of 40 litres
Display Features :
The unit is fitted with a front panel providing information on the unit.
The display indicates :
- The time until the programme is finished.
- The current internal temperature.
- The current internal pressure.
- The ongoing cycle
- Any alerts or alarms.
Technical Specifications :
The sterilizer is suitable for wrapped, unwrapped, solid and hollow items as well as porous loads such as drapes and gowns.
The unit fitted with a front-loading door.
The internal chamber made from stainless steel 316Litre.
The internal chamber has a volume of 40 Litres or more.
Vacuum relief line should be filtered with ≤0.3 µm pore size to allow sterile air into chamber.
The unit is provided with a minimum of three (3) internal shelves.
The unit has a standard program at 2.2 bar at a temperature of 134°C.
The unit has a standard program between 1.0 and 1.1 bar with a temperature between 118 – 121°C.
The unit is fitted with a safety lock on the front door, preventing the door to be opened when the unit is under pressure.
The unit provided with an internal water tank with a capacity of 4.2 litre or more.
The unit equipped with a steam generator.
The unit is designed in such a way that outer surfaces remain at safe temperatures when the unit is in operation.
The unit is designed and constructed in such a manner that it is able to withstand frequent disinfection with hospital-grade products.
The unit is able to function on a single-phased power grid.
Power requirements: 240 Volts - 50/60 Hz (A 110 Volt unit is not available).
Alarm and Safety Features :
Alarms are audible as well as visual.
Alarms are available for/when :
- Low water.
- Door not closed.
- Exceeding high temperature limit.
- Failed cycles.
- Temperatures are about to reach limits of the equipment.
- Pressures are about to reaching limits of the equipment.
- Power failure
A notification that the end of sterilization cycle has been reached.
The unit is provided with an over-pressure safety valve and an over-temperature safety system.
Important :
To ensure the sterilizer is capable to perform as per manufacturers specifications certain infrastructure provision are required.
Therefore, these sterilizers should only be purchased after consultation of the Medical Devices Unit in Supply Division.
Intended Use :
Steam sterilizers use pressurized steam to generate moist heat to eliminate viable microbes from non-heat-sensitive medical devices, including heat-tolerant products used for surgical and general patient care.
Steam sterilization kills microbes effectively and is often viewed as the gold standard of healthcare sterilization methods.
For sterilization of full solid, porous, hollow A and B, plastics, rubber, unwrapped, bagged, single or double wrapped.
Not designed for sterilization of liquids, food stuffs or waste.
