Multi or Single Jet Water Meter Manufacturer,Supplier and Exporter in India
Product Code : EL-WS-10466
Quick Answer: The Multi or Single Jet Water Meter is a multi-jet or single-jet water meter with a 13 mm (½ inch) nominal bore, a maximum working pressure of 10 bars and a nominal flow rate of 1.5 cubic meters / hour.
Last updated: October 2026
Key Features
- Nominal bore 13 mm (½ inch), for horizontal and/or vertical installation
- Maximum working pressure 10 bars; testing pressure 20 bars
- Qn 1.5, Qmax 3 cubic meters / hour; Qmin 30 litres / hour
- Smallest readable unit 0.1 litres; maximum register reading 99 999 cubic meters
- Magnetic direct drive with extra dry dials, anti-fogging glass and leak detection star
- Corrosion resistant metallic body, epoxy coated inside and out, with internal inlet strainer
Technical Specifications
| Specification | Value |
|---|---|
| Type | Multi-jet or single-jet |
| Nominal bore | 13 mm (½ inch) |
| Maximum working pressure | 10 bars |
| Testing pressure / temperature | 20 bars / 50ºC |
| Maximum water temperature | 40ºC |
| Flow rates | Qmin 30 litres/hour; Qt 120 litres/hour; Qn 1.5 and Qmax 3 cubic meters/hour |
| Accuracy | + 2% (maximum to transitional flow); + 5% (minimum to transitional flow) |
| Smallest readable unit | 0.1 litres |
| Maximum register reading | 99 999 cubic meters |
| Register | Metallic or plastic housing with cover, rotates through 360 degrees |
About This Product
This meter can be installed horizontally or vertically and uses a statically and hydro-dynamically balanced rotor that keeps interruption to flow low. It has a magnetic direct drive and an extra dry register with dials under anti-fogging glass and a leak detection star, and the register housing turns through 360 degrees and stops at the chosen angle. The totaliser can be swapped on site, an internal strainer sits on the inflow side, and the corrosion resistant metallic body is epoxy coated inside and outside. Science Lab Export can supply the Multi or Single Jet Water Meter to Uganda, Montenegro, the Seychelles, Saint Vincent and the Grenadines and São Tomé and Príncipe.
Frequently Asked Questions
What size is the Multi or Single Jet Water Meter?
It has a nominal bore diameter of 13 mm (½ inch).
What pressure and temperature can it work at?
A maximum working pressure of 10 bars and a maximum operating water temperature of 40ºC. It is tested at 20 bars and 50ºC.
What are its flow rates?
Minimum 30 litres/hour, transitional 120 litres/hour, nominal 1.5 cubic meters/hour and maximum 3 cubic meters/hour.
Related: Water & Sanitation, Water Tank Collapsible, Water Tank (bladder), Cast Iron Check Valve and Medical Renewable.
For a quotation on the Multi or Single Jet Water Meter, contact Science Lab Export.
